|
|
Build Your Online Product Catalogs?
| Product Name: |
Manual mold design silicone rubber
|
| Supply Ability: |
1000 ton |
| Related proudcts |
silicone rubber, liquid silicone, rtv, |
| Specifications |
HY5# |
| Price Term: |
FOB |
| Port of loading: |
Shenzhen |
| Minimum Order |
200 KG |
| Unit Price: |
3.9-4.2 USD/KG |
|
Manual mold design silicone rubber applications
manual mold design silicone rubber is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc.
Manual mold silicone rubber features description
The manual mold design silicon rubber features with the resistance to deformation, good tensile strength as well as low shrinkage, and time of reproduction ***ermined on the basis of customers.
Manual mold design silicone rubber operations
Firstly process and prepare the model mold or the product to be duplicated, take certain amount of the silicon rubber, add 2-3% solid curing agent, and mix evenly and they are ready for use. One pair of mold can be solidified and formed in 2-3 hours.
(Note: our co***ny does not recommend you to add silicon oil. If a special soft silicon mold or fine ***ailed and complex patterns products are required, 5%-10% silicon oil can be added to soften the mold for easy demould.)
Frequently asked questions for Silicon rubber for manual mold
What should we do when the air bubbles appeared in the process of mold making ?
To handle this situation depends on different cases. Under the condition of an available vacuum pumping machine, mix the silicon rubber and curing agent evenly and then take it to vacuum chamber to deair. If without a vacuum pumping machine, reduce the amount of the curing agent properly. For example, change the mixing ratio of the silicon rubber and the curing agent from former 4% to 1%-2%. In this way, the pre-cross linking time of silicon rubber will slow down, so the air in the mold will be eliminated gradually to reduce the air bubbles.
|
| Company: |
HONG YE JIE SILICONE TECHONOLOGY CO***NY
|
| Contact: |
Mr. Michael Zhou |
| Address: |
Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang, Shenzhen, Guangdong, China |
| Postcode: |
518711 |
| Tel: |
086-755-89948019 |
| Fax: |
086-755-8994803 |
| E-mail: |
|
|
|
|
Home
